ON THE CONTRIBUTION OF ROUGHNESS EFFECTS TO THE SCALING OF SHIP RESISTANCE
AuthorsEça, L., Starke, A.R., Kerkvliet, K., Raven, H.C.
Conference/JournalConference on Computational Methods in Marine Engineering (Marine 2021)
DateJun 2, 2021
Roughness effects are one of the main challenges of the prediction of ship resistance using traditional model tests and extrapolation procedures. Computational Fluid Dynamics (CFD) can play an important role in the improvement of empirical correlations. Nowadays, most CFD RANS solvers use an equivalent sand-grain roughness height to model roughness effects. Therefore, the simulation of roughness effects includes two main challenges: estimate the equivalent sand-grain roughness height that corresponds to a given average roughness height typically used to characterize the roughness of ships; include sand-grain roughness effects in the most accurate RANS turbulence models for the simulation of ship flows, as for example the k – ω SST eddy-viscosity model.
In this work, the flows around different geometries (fat plate, submarine and two ships) at full scale Reynolds numbers (108 to 109) are simulated with RANS solvers using the k – ω SST eddy-viscosity model. Roughness effects are included in the k and ω boundary conditions for values of the sandgrain roughness height covering hydraulically smooth and fully-rough surfaces. It is shown that with the proper scaling, the increase of the friction resistance coeffcient with the sand-grain roughness height is equivalent for the four geometries tested. Conversion of average roughness height to sandgrain roughness is assessed by comparing CFD results with Bowden and Davison and Townsin et al. empirical correlations. Results of the simulations show the best agreement with the Townsin et al. correlation with a small variation of the ratio between average roughness and sand-grain roughness heights.
YOU WILL NEED AN ACCOUNT TO VIEW THIS CONTENT
To view this content you will need a login account. If you already have an account you can sign in below. If you want an account then you can create one.